A flat roof in North Nashville has a tough job. It bakes through humid summers, cycles above and below freezing in winter, and takes heavy spring storms. EPDM rubber handles that weather well, but the complete roof system has to be built correctly. Those details are hidden from most property owners, and they matter when comparing EPDM roofing companies in North Nashville, TN.
For owners of buildings in MetroCentre, Germantown, Bordeaux and Whites Creek, this guide covers two things. First, what the membrane itself brings to your building. Second, the installation decisions that affect how long your roof lasts. Call Glick Roofing Systems at (615) 265-0598 to discuss your EPDM roofing needs and arranging an inspection.
What Is EPDM Roofing?
EPDM stands for ethylene propylene diene monomer, a synthetic rubber. Ethylene and propylene form the backbone of the rubber. The small amount of diene gives it sites to cross-link during curing, also called vulcanization.
That curing makes EPDM a thermoset. Once cured, it cannot be melted and heat-welded like TPO or PVC. This explains how EPDM seams are built, which we cover below. Most EPDM is sold in large black sheets. White-surfaced versions are also available for buildings where reflectivity matters.
How Do EPDM Benefits Differ From Installation Quality?
Many roofing pages list EPDM’s benefits as if they come out of the box. Some do. Much of what you actually experience also depends on the roof design and installation.
What Does the EPDM Membrane Offer?
- Strong resistance to UV exposure, ozone and weathering
- Flexibility in cold weather and tolerance of temperature swings
- Wide sheets that can reduce the number of field seams
- Repairability using compatible materials
Which Installation Details Matter Most?
- Watertight seams and T-joints
- Resistance to wind uplift at corners and edges
- Proper flashing at pipes, curbs and walls
- Effective roof drainage
Even a durable 60-mil membrane can develop leaks if a required T-joint detail is missing or a drain sits above the surrounding low spot.
One distinction matters: standard black EPDM is not a reflective roof. It absorbs more sunlight than white roofing, which can affect heating and cooling demand. If reflectivity is a priority, options include white EPDM, a compatible reflective coating or a thermoplastic membrane. Our guide to TPO roofing in North Nashville, TN discusses another option.

How Should You Choose the Right EPDM Membrane?
Not every EPDM roof uses the same sheet. A good contractor matches the membrane to the building.
- Membrane thickness: EPDM commonly comes in 45, 60 and 90 mil. A 60-mil membrane is a common commercial choice. A 90-mil sheet offers additional thickness, but puncture and hail performance also depend on the product, cover board and complete roof assembly. Warranty eligibility depends on the selected system’s requirements.
- Reinforced vs. non-reinforced: Reinforced EPDM sheets contain an internal scrim and may be specified for mechanically attached systems. Non-reinforced membranes are also used in approved roofing assemblies. Follow the manufacturer’s system requirements rather than assuming either type suits every attachment method.
- Black vs. white: Black is the standard option. White-surfaced EPDM reflects more sunlight, with pricing and energy performance depending on the product and building.
- Fire rating and tape options: Fire classification belongs to the complete tested roof assembly. Some designs require a particular membrane formulation. Certain sheets also come with factory-applied seam tape to reduce field preparation.
How Are EPDM Roof Seams Installed?
Because cured EPDM cannot be heat-welded like a thermoplastic membrane, its seams use approved bonding materials. Many modern systems use seam tape:
- Clean the overlapping surfaces as required.
- Apply the specified primer and allow it to dry according to the product instructions.
- Position the approved tape, join the sheets and roll the seam firmly with the specified roller.
Exposed edges receive lap sealant where the manufacturer requires it. T-joints, where three layers of membrane meet, receive the patches or other details specified for the system.
Older EPDM seams may deteriorate or separate over time, particularly when the original bonding materials or installation details have failed. Regular inspections can help identify seam problems before water reaches the building interior.
How the Membrane Is Attached
There are three standard attachment methods. Each suits different project conditions.
- Fully adhered: An approved adhesive bonds the membrane to a suitable substrate. Adhesive type, coverage and application method depend on the system. Wind performance also depends on the attachment of the insulation, cover board and other underlying components.
- Mechanically fastened: Approved membrane is secured with specified plates, fasteners or battens. Fastener type and spacing must follow the roof’s design requirements, including perimeter and corner zones.
- Ballasted: The membrane is loosely laid beneath specified stone or pavers. The structure must carry the added load, and building height and wind exposure can limit suitability. Ballast can also complicate access for leak investigation.
The insulation and cover board need appropriate securement too. Requirements for each layer should follow the approved assembly and project specifications.
Before a new roof goes on, the contractor should evaluate tear-off versus recovery. That decision depends on moisture, deck condition, existing roof layers, structural capacity, product compatibility and applicable code. Asphalt-based surfaces may require an approved separation layer before EPDM installation. Core samples or a moisture survey may be needed to investigate conditions that a visual inspection cannot confirm.
Flashing Penetrations and Edges
Common leak points occur where the membrane meets pipes, curbs, walls and edges. Proper details can include:
- Pipes: Compatible pre-molded pipe seals, with the specified top clamp and sealing details. Other shapes may require field-formed flashing.
- HVAC curbs, skylights and hatches: Membrane or flashing runs up the curb, with properly formed corners and the specified top termination.
- Walls and parapets: Membrane runs up the wall and is secured and protected using the required termination, counterflashing or coping details.
- Pitch pans: These may be needed around irregular penetrations. They require compatible filler and periodic inspection, so suitable alternative flashing details are worth considering.
- Roof edges: Edge metal must be properly secured and integrated with the membrane according to the applicable tested details and project requirements.
New penetrations added later by HVAC or electrical contractors can become leak sources. Coordinate them with your roofer so the new openings are flashed properly.
Designing Drainage That Works
“Flat” roofs need effective drainage. A commonly specified design slope is 1/4 inch per foot, but the required slope depends on the applicable building code, roof assembly and project specifications.
Where a clamping-ring drain is used, the membrane must be integrated with the drain using the specified sealing materials and securement. Scuppers and gutters handle perimeter drainage, while overflow drains or scuppers provide backup drainage where required.
Standing water should be evaluated, particularly when it remains for more than roughly 48 hours after rainfall under suitable drying conditions. Causes may include inadequate slope, blocked drains or localized low spots. Ponding adds weight, collects debris and can affect vulnerable details and warranty coverage.
Nashville’s rainfall makes drainage an important part of roof performance. Keeping drains and scuppers clear is a practical part of a regular roof repair and maintenance plan.
Repairing an EPDM Roof Correctly
Common EPDM roof problems include:
- Opened seams
- Shrinkage that pulls flashings tight at walls and curbs
- Punctures from foot traffic or dropped tools
- Failed pipe boots
- Clogged drains
A compatible membrane patch generally requires cleaning, appropriate primer, specified overlap and firm rolling. Repair materials and details should follow the roofing manufacturer’s instructions. Seam, flashing and drainage problems may require different repairs.
Do not apply ordinary roofing cement, tar or other unapproved asphalt products to EPDM. They can damage the rubber or interfere with later repairs. Schedule inspections in spring and fall, plus after hail or high-wind storms, to catch developing problems early.
How to Choose an EPDM Roofing Company in North Nashville
Ask these questions before you sign:
- Which manufacturers authorize you to install their systems, and which manufacturer-backed warranties are available?
- Which attachment method do you recommend for my building, and why?
- Which seam materials will you use, and how will you handle T-joints?
- How will you detail my rooftop units and pipes?
- Will the proposed drainage meet project requirements, or will tapered insulation or other improvements be needed?
- How will you check for moisture before recommending a recovery?
- Do you hold the licenses required for this project, and can you provide proof of insurance?
A contractor who answers these clearly is giving you a roof plan, not just a price per square foot. These same questions apply when comparing options for EPDM roofing in West Nashville, TN.
Talk to Glick Roofing About Your North Nashville EPDM Roof
EPDM performance depends on the membrane, seams, attachment, flashings and drainage working together. Whether you are considering a new roof, a recovery or repairs to an aging system, an assessment helps establish the roof’s condition and the appropriate next steps.
Call Glick Roofing Systems at (615) 265-0598 to discuss your North Nashville EPDM roof and arranging an inspection.
Frequently Asked Questions
How long does an EPDM roof last in Nashville?
An EPDM roof can provide decades of service, but its lifespan depends on membrane specifications, installation quality, drainage, exposure and maintenance. Product documentation can help explain performance expectations. Warranty terms describe coverage and should not be treated as a guarantee of service life.
Is EPDM better than TPO roofing?
Neither one wins every time. EPDM has a long track record, stays flexible in cold weather and can be repaired with compatible materials. TPO commonly has a reflective white surface and heat-welded seams. The right choice depends on energy goals, rooftop traffic, budget and the existing roof assembly.
What are the disadvantages of EPDM roofing?
Standard black EPDM absorbs sunlight. Its seams depend on compatible bonding materials and proper preparation. Sharp debris and careless foot traffic can puncture the membrane. Appropriate membrane selection, walkway pads and careful installation help manage these risks.
How much does an EPDM roof cost in North Nashville?
Cost depends on roof size, membrane thickness, attachment method, insulation, tear-off requirements and the number of penetrations needing flashing. An on-site assessment helps establish the scope for a written proposal.
Can EPDM be installed over an existing roof?
Sometimes. A recovery depends on the existing roof’s condition, moisture findings, structural capacity, number of roof layers, applicable code and the proposed system’s requirements. Asphalt-based roofing may need an approved separation layer. Testing may be necessary to confirm hidden conditions.
Can you walk on an EPDM roof?
EPDM can accommodate normal inspection and maintenance traffic, but sharp debris and concentrated loads can damage it. Compatible walkway pads along frequently used service paths help protect the membrane from wear and punctures.

